European Test Methods - ISO, EN, DIN, & IP
We perform quality and conformance petrochemical testing by internationally recognized European test methods, including EN, DIN, ISO, & IP methods. ISO (the International Organization for Standardization) is an independent civilian-run organization with test standards that are accepted world-wide. EN test methods (European Standards) are published and maintained by the European Committee for Standardization, among other organizations. DIN test methods are German standards that are accepted internationally. International Petroleum (IP) test methods are part of British Standard 2000, and are made in cooperation with ISO, EN, and ASTM test methods.
The following is a consolidated list of the tests that we perform according to ISO, EN, DIN, and IP standards. If you are interested in an European test method that is not on this list, please contact us, and we will work with you to meet your testing needs.
ISO Test Methods
- ISO 2977 - Aniline & Mixed Aniline Point
- ISO 6245 - Ash Content
- ISO 3839 - Bromine Number
- ISO 4262 - Ramsbottom Carbon Residue
- ISO 3015 - Cloud Point Test
- ISO 2160 - Copper Strip Corrosion
- ISO 3405 - Distillation
- ISO 2719 - Flash Point Test
- ISO 3675 - Density/Specific Gravity
- ISO 6618 - Acid Number
- ISO 6619 - Acid Number
- ISO 4623 - Oxidation Stability
- ISO 3016 - Pour Point
- ISO 7120 - Rust Prevention
- ISO 2909 - Viscosity Index
- ISO 13357 - Filterability of Lubricants
- ISO 4406 - Liquid Particle Count
- ISO 7536 - Oxidation Stability
- ISO 5165 - Cetane Number
- ISO 3735 - Sediment by Extraction
- ISO 3104 - Kinematic Viscosity
- ISO 3733 - Water by Distillation
- ISO 3675 - Density/Specific Gravity
- ISO 2049 - ASTM Color
- ISO 5163 - Motor Octane Number
- ISO 5164 - Research Octane Number
- ISO 5662 - Copper Corrosion
- ISO 3012 - Mercaptan Sulfur
- ISO 3648 - Net Heat of Combustion
- ISO 10337 - Water in Crude Oil
- ISO 12205 - Oxidation Stability
- ISO 12937 - Water Content (Karl Fischer)
- ISO 6293 - Saponification Number
EN Test Methods
- EN 14110 - Methanol Content in Biodiesel
- EN 14538 - Potassium & Sodium in Biodiesel
- EN 14538 - Calcium & Magnesium in Biodiesel
- EN 15751 - Biodiesel Oxidation Stability
- EN 116 - Cold Filter Plugging Point (CFPP)
DIN Test Methods
- DIN 51775 - Aniline Point
- DIN 51575 - Ash Content
- DIN 51597 - Cloud Point
- DIN 51751 - Distillation
- DIN 51758 - Flash Point
- DIN 51757 - Density or Specific Gravity
- DIN 51587 - Oxidation Stability
- DIN 51597 - Pour Point
- DIN 51585 - Rust Prevention
- DIN 51554 - Baader Test
IP Test Methods
- IP 2 - Aniline Point
- IP 4 - Ash Content
- IP 14 - Ramsbottom Carbon Residue
- IP 15 - Pour Point
- IP 16 - Freeze Point
- IP 19 - Demulsibility Characteristics of Oil
- IP 34 - Flash Point
- IP 40 - Oxidation Stability
- IP 41 - Cetane Number
- IP 48 - Oxidation Characteristics of Oil
- IP 50 - Cone Penetration
- IP 53 - Sediment by Extraction
- IP 61 - Sulfur
- IP 71 - Kinematic Viscosity
- IP 74 - Water by Distillation
- IP 125 - Soluble Cutting Oil Corrosion of Cast Iron
- IP 130 - Bromine Number
- IP 135 - Corrosion Protection
- IP 136 - Saponification Number
- IP 137 - Oil Content of Water
- IP 138 - Oxidation Stability
- IP 139 - Acid/Base Number
- IP 142 - Oxidation Stability
- IP 143 - Asphaltenes
- IP 146 - Foaming Characteristics
- IP 160 - Density
- IP 177 - Acid Number
- IP 196 - ASTM Color
- IP 216 - Particulate Contamination
- IP 226 - Viscosity Index
- IP 236 - Motor Octane Number
- IP 237 - Research Octane Number
- IP 240 - Extreme Pressure (EP) Test
- IP 274 - Electrical Conductivity
- IP 280 - Oxidation Stability
- IP 299 - Bromine Index
- IP 306 - Oxidation Stability
- IP 309 - Cold Filter Plugging Point (CFPP)
- IP 310 - Cone Penetration
- IP 313 - Air Release Value
- IP 315 - Copper Corrosion
- IP 323 - JFTOT
- IP 326 - Extreme Pressure Test
- IP 342 - Mercaptan Sulfur
- IP 354 - Acidity in Aviation Turbine Fuel
- IP 378 - Storage Stability
- IP 379 - Total Nitrogen
- IP 381 - BTU Heat of Combustion
- IP 386 - Water in Crude Oil
- IP 388 - Oxidation Stability
- IP 406 - Boiling Range by GC
- IP 415 - Particulate Contamination
- IP 423 - Particulate Contamination
- IP 435 - Freeze Point
- IP 438 - Water Content
- IP 444 - Cloud Point
- IP 446 - Cloud Point
- IP 467 - High Temperature Stability
- IP 501 - Metals by ICP
- IP 547 - Metals in Biodiesel
- IP 574 - Biodiesel Oxidation Stability
- IP 583 - FAME Content in Jet Fuel
- IP 585 - FAME in Jet Fuel by GC
